Special Flow Instruments - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Sat, 25 Jun 2022 02:56:56 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png Special Flow Instruments - KEPmeters https://kepmeters.com 32 32 MS-735 https://kepmeters.com/product/ms-735/ Sat, 05 May 2018 23:08:49 +0000 https://kepmeters.com/?post_type=product&p=1514 MINIbatcher Special for Output Time Control

The post MS-735 first appeared on KEPmeters.

]]> Timed Relay Control With Start and Stop Buttons
The MS735 is a special version of our Minibatcher series batch counter. The standard Minibatcher is modified to bring a 60Hz (50 Hz) signal to pin 10 (AC powered units only). The user has the option of connecting this signal through the B relay and into the A input. By entering the proper scaling factor, the user can scale the input to read the desired time base. EXAMPLE: If the unit is powered with 115VAC @ 60Hz, The scaling factor for A can be set to yield different time bases: i.e. 60 yields seconds, 360 yields minutes & 1/ 10, 3600 yields minutes, etc. With a little imagination, this special can be used in many applications involving batch timing control. To order this special, add the prefix “MS735” to the standard Minibatcher part number, i.e. MS735MB2A3.

The post MS-735 first appeared on KEPmeters.

]]> MS-287 https://kepmeters.com/product/ms-287/ Sat, 05 May 2018 22:59:57 +0000 https://kepmeters.com/?post_type=product&p=1512 Timer/Counter Combo Or Dual Timer

The post MS-287 first appeared on KEPmeters.

]]> The MS287 is a special version of our Minitrol series counter/ratemeter. The standard Minitrol is modified to bring a 60Hz(50Hz) signal to pin 10 (AC powered units only). The user has theoption of connecting this signal to the A input, B input or both. Byentering the proper scaling factor, the user can scale the input toread the desired time base. EXAMPLE: If the unit is powered with115VAC @ 60Hz, The scaling factor for A can be set to yielddifferent time bases: i.e. 60 yields seconds, 360 yields minutes & 1/10, 3600 yields minutes, etc. Input B can be scaled the same wayor used as a separate counter. With a little imagination, thisspecial can be used in many applications involving time/countcontrol. To order this special, add the prefix “MS287” to thestandard Minitrol part number, i.e. MS287MC2A3

The post MS-287 first appeared on KEPmeters.

]]> Compressed Air Flow Computer ES749 https://kepmeters.com/product/es749-air/ Wed, 11 Apr 2018 06:15:15 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1384 Compressed Air Metering Flow Computer with Advanced Options Available.

The post Compressed Air Flow Computer ES749 first appeared on KEPmeters.

]]> The Compressed Air Flow Computer ES-749 satisfies the instrument requirements for compressed air metering applications. The compressed air flow computer ES749 is suitable for use in compressed air metering applications.

 

The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is also supported.

Compressed Air Metering Illustration

 

 

Other Applications for ES-749 Include:

    • Natural Gas
    • Steam Mass, Steam Heat, Steam Net Heat, Steam Delta Heat
    • Fuel Oil
    • Industrial Gas
    • Chilled Water Only
    • Heated Water Only including Low Delta T Cutout

The post Compressed Air Flow Computer ES749 first appeared on KEPmeters.

]]> Industrial Gas Flow Computer ES749 https://kepmeters.com/product/es749-gas/ Wed, 11 Apr 2018 05:40:18 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1379 Industrial Gas Metering Flow Computer with Advanced Gas Equations.

The post Industrial Gas Flow Computer ES749 first appeared on KEPmeters.

]]> The Industrial Gas Flow Computer ES-749 satisfies the instrument requirements for gas metering applications. The industrial gas flow computer ES749 is suitable for use in gas metering applications for Gas Mass, Corrected Gas Volume and Gas Combustion Heat.

GAS MASS
A flowmeter measures the actual volume flow in a gas line. Temperature and pressure sensors are installed to measure temperature and pressure.

GAS CORRECTED VOLUME
A flowmeter measures the actual volume flow in a gas line. Temperature and pressure sensors are installed to correct for gas expansion effects.

GAS COMBUSTION HEAT
A flowmeter measures the actual volume flow in a gas line. Temperature and pressure sensors are installed to measure temperature and pressure.

The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is also supported.

Gas Mass Illustration

 

Gas Corrected Volume / Gas Combustion Heat Illustration

 

Other Applications for ES-749 Include:

    • Natural Gas
    • Steam Mass, Steam Heat, Steam Net Heat, Steam Delta Heat
    • Fuel Oil
    • Compressed Air
    • Chilled Water Only
    • Heated Water Only including Low Delta T Cutout

The post Industrial Gas Flow Computer ES749 first appeared on KEPmeters.

]]> Steam Metering Flow Computer ES749 https://kepmeters.com/product/es749-steam/ Wed, 11 Apr 2018 04:27:57 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1375 Steam Metering Flow Computer with Steam Mass, Steam Heat, Steam Net Heat and Steam Delta Heat Equations.

The post Steam Metering Flow Computer ES749 first appeared on KEPmeters.

]]> The Steam Metering Flow Computer ES-749 satisfies the instrument requirements for steam metering applications. The steam metering flow computer ES749 is suitable for use in Steam Mass, Steam Heat, Steam Net Heat and Steam Delta Heat applications.

STEAM MASS / STEAM HEAT
A flowmeter measures the actual volume flow in a steam line. A temperature and/or pressure sensor is installed to measure temperature and/or pressure.

STEAM NET HEAT
A flowmeter measures the actual volume flow in a steam line. A temperature and a pressure sensor are installed to measure temperature and/or pressure. All measurement are made on the steam side of a heat exchanger.

STEAM DELTA HEAT
Measures actual volume flow and pressure of the saturated steam in the supply piping as well as the temperature of the condensate in the downstream piping of a heat exchanger.

The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is also supported.

Steam Mass / Steam Heat Illustration

 

Steam Net Heat Illustration

 

Steam Delta Heat Illustration

 

Other Applications for ES-749 Include:

    • Natural Gas
    • Industrial Gases
    • Fuel Oil
    • Compressed Air
    • Chilled Water Only
    • Heated Water Only including Low Delta T Cutout

The post Steam Metering Flow Computer ES749 first appeared on KEPmeters.

]]> Natural Gas Flow Computer ES749 https://kepmeters.com/product/es749-natural-gas/ Wed, 11 Apr 2018 02:48:47 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1365 Utility Metering Flow Computer with AGA NX-19 for Natural Gas Applications

The post Natural Gas Flow Computer ES749 first appeared on KEPmeters.

]]> The Natural Gas Flow Computer ES-749 satisfies the instrument requirements for natural gas applications. The NX-19 option is available for Natural Gas calculations where the user requires compensation for compressibility effects. Compensation for these compressibility effects are required at medium to high pressure and are a function of the gas specific gravity, % CO2, % Nitrogen, as well as temperature and pressure. The compressibility algorithm used is that for AGA NX-19.

The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is also supported.

Natural Gas Measurement Illustration

 

Other Applications for ES-749 Include:

    • Steam Mass
    • Steam Heat, Industrial Gases
    • Fuel Oil
    • Compressed Air
    • Chilled Water Only
    • Heated Water Only including Low Delta T Cutout

The post Natural Gas Flow Computer ES749 first appeared on KEPmeters.

]]> MASSbatch (MB8) https://kepmeters.com/product/massbatch/ Fri, 09 Feb 2018 06:04:57 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=947 Temperature / Density Compensated Batch Controller

The post MASSbatch (MB8) first appeared on KEPmeters.

]]> Featuring 8 digits of bright, .55″, alpha-numeric display, the MASSbatch (MB8) can accept up to 10,000 pulses per second and a direct 100W platinum RTD or analog input. The MASSbatch batch controller has two separate, 8 digit, floating decimal, “K” factors to convert the inputs to meaningful total and rate data. The user, with the push of a button, can toggle back and forth to view the total of the batch, the rate of flow, temperature or density and the grand total. Two control outputs are provided for two-stage valve control.

The post MASSbatch (MB8) first appeared on KEPmeters.

]]> MS720 https://kepmeters.com/product/ms720/ Fri, 09 Feb 2018 05:31:10 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=943 Multi-Function Flow Computer for Thermal Mass Flowmeters

The post MS720 first appeared on KEPmeters.

]]> The MS720 is a special purpose flow computer intended for use with Thermal Mass Flowmeters. The units of measure for flow rate and total can be entered by the user. An auxillary, internal, high current, DC power supply is provided to power the Thermal Mass Flowmeters. Several DC power supply voltages are available.

The post MS720 first appeared on KEPmeters.

]]> MS748 https://kepmeters.com/product/ms748/ Sat, 03 Feb 2018 00:26:55 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=796 Rugged, Vehicle/Field Mount, Multi-Function Flow Computer

The post MS748 first appeared on KEPmeters.

]]> The MS-748 Flow Computer satisfies the instrument requirements for a variety of flowmeter types in liquid, gas, steam and heat applications. Multiple flow equations are available in a single instrument with many advanced features. The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is supported.

The post MS748 first appeared on KEPmeters.

]]> ES761 https://kepmeters.com/product/es761/ Fri, 02 Feb 2018 21:06:42 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=794 Net Energy Flow Computer for Saturated Steam Energy & Condensate Return Energy

The post ES761 first appeared on KEPmeters.

]]> Many of today’s flow meters offer multiple outputs which are assignable to flow and temperature. The ES761ST2 offers enhanced functionality to permit these multiple outputs to be used with added flexibility. This flexibility is utilized in common applications such as when computing the net energy of saturated steam energy in minus condensate return energy out. Flow and Temperature can be measured at the multi-variable flow meter. A separate temperature measurement can be made in the condensate. The ES761 then computes the mass flow of steam as well as the input energy of steam from the available input sensors on steam, will also compute, the energy in the condensate return, and will compute the net energy. Refer to diagram which follows.

The post ES761 first appeared on KEPmeters.

]]>