Training Aids

Video Training

A collection of training videos for selected products highlighting the product features, operation and setup information. Products include: BAT R/T-M, BATCHtrol II (BT2), ES756-INT69, MINItrol (MRT), SUPERtrol ILE (ST1LE) and SUPERtrol II (ST2). Please check back often as we will be adding new videos soon.

Go to the Video Training page to watch the videos.

Utility Flow Metering for Steam and Chilled Water

Utility Metering Tutorial

A Tutorial for the IDEA Distribution Workshop

ST1 Training Aids

Download these helpful training aids for the SUPERtrol I (ST1) batch controller & flow computer. The files will help guide you through instrument setup for Basic Introduction, Commisioning, Dataloger and RS485 MODBUS.

ST1 with RS485 MODBUS

Training Aid on Using and Testing RS485 Modbus RTU
RS485 allows up to 32 devices to share a single communication cable. Modbus RTU is an industry standard protocol used by a variety of systems.

ST2 Training Aids

Download these helpful training aids for the SUPERtrol II (ST2) flow computer. The files will help guide you through instrument setup for Basic Introduction, Commisioning, Dataloger, Use with ILVA Flowmeter and RS485 MODBUS.

ST2 Introduction	This introduction describes the basic information regarding Steam Mass and Liquid Delat Heat applications.
ST2 Commissioning	This document includes a series of step by step verification tests normally done during commissioning.
ST2 Datalogger	TrainingAid on Using SUPERtrol II Datalogger The SUPERtrol II Flow Computer has an internal data logger that can be used to periodically log the time, date, totalizers, and average values of various process variables.
ST2 with Accelabar Flowmeter	Training Aid on Using SUPERtrol II with Accelabar Flowmeter The Accelabar is a proprietary Veris flow meter which finds its application in steam metering. The Accelabar flow meter design offers the ability to provided accurate metering even when installed with short inlet and outlet straight pipe runs. It also offers a wider flow turndown than orifice plates and flow nozzles.
ST2 with Verabar Flowmeter	Training Aid on Using SUPERtrol II with Verabar Flowmeter The Verabar is a proprietary Veris flow meter which finds its application in steam metering. The VERIS Verabar averaging pitot flow sensor provides unsurpassed accuracy and reliability
ST2 with Gilflo Flowmeter	Training Aid on Using SUPERtrol II with Gilflo Flowmeter The Gilflo B Series is a proprietary Spirax Sarco flow meter which finds its primary application in steam metering. The Gilflo B Series design offers a very wide flow turndown unmatched by orifice plates and flow nozzles.
ST2 with ILVA Flowmeter	Training Aid on Using SUPERtrol II with ILVA Flowmeter The ILVA is a proprietary Spirax Sarco flow meter which finds its primary application in steam metering. The ILVA design offers a very wide flow turndown unmatched by orifice plates and flow nozzles.
ST2 with V-CONE Flowmeter	Training Aid on Using SUPERtrol II with V_CONE Flowmeter The V-CONE is a proprietary McCrometer flow meter which finds its primary application in steam metering. The V-CONE flow meter design offers the ability to provided accurate metering even when installed with short inlet and outlet straight pipe runs. It also offers a wider flow turndown than orifice plates and flow nozzles.
ST2 with Modems	Training Aid on Commissioning the MPP2400N and IM2400 Telephone Modems with SUPERtrol II
ST2 with RS485 MODBUS	Training Aid on Using and Testing RS485 Modbus RTU RS485 allows up to 32 devices to share a single communication cable. Modbus RTU is an industry standard protocol used by a variety of systems.

PowerPoint Pesentations

Download these PowerPoint presentations and use them for training sessions or to get familiar with the features, functions, applications and setup of our most popular products. Choose from the links below:

MESR-901 Configuration	Overview of configuration of the MESR-901. This presentation shows step by step procedure for configuring the MESR-901 Gateway.
Applications for Energy Solutions Metering	A presentation showing applications representing solutions for energy management with descriptions of the type of metering being depicted.
Products for Energy Solutions Metering	A presentation showing products used in applications representing solutions for energy management.
Utility Metering Tutorial	An overview of flowmetering technologies for use with KEP Flow Computers
LEVELtrol-II	Level/Total and Level/Batcher
SUPERtrol-ILE	Economical Rate/Totalizer & Batcher
SUPERtrol-I	Multifunction Flow Computer
SUPERtrol-II	Multifunction Heat, Gas, Steam Liquid Flow Computer
520K & MINItrol	520K & MINITROL Presentation

Tech Tips and Application Notes

These Tech Tips and App Notes are filled with usefull information on where KEP products are used and how they are used. There are allso many tech tips to help you understand how our products cn be configure for specific functions. Choose from the links below:

Batching Application for Produced Water in Oil Production Operation & Frac Water from Hydraulic Fracturing of Shale Gas Wells	This *Application Note* explains how the KEP MS716 Batch Controller is used in Batch Loading of Produced Water from Oil Production and & Frac Water from Hydraulic Fracturing of Shale Gas Wells.
SUPERtrol-II Internet Access	Tech Tip for Real Time Internet Access for ST2 using Modbus TCP Download The Tech Tip for Information Download the project files for real time demonstration accessing a SUPERtrol-2 connected to internet at KEP headquarters. You can download all the files needed by selecting the "Download Project Files (ZIP)" button at left or you can download each file separately below:
Printing with SUPERtrol I (St1)	This *KEP Tech Tip* explains step by step instructions for wiring and configuring the Supertrol 1 flow computer with various slip and ticket printers.
SUPERtrol-II Chilled Water	A detailed application note from KEP's application engineering staff describes a typical heated/chilled water metering system using a magnetic flowmeter and the SUPERtrol-II Flow Computer.
Real-Time Wireless LAN Access for SuperTrol-2 Using Modbus TCP	A detailed application note from KEP's application engineering staff describes how the SuperTrol-2 can be configured to provide an IP Address connection via a Modbus TCP data exchange over the wireless LAN, or to a remote PC using the DIGI Wi-SP converter.
SUPERtrol-II Steam and Chilled Water Submetering System Improves Billing Accuracy	KEP was recently involved in a submetering application at a major entertainment complex in New York City. The Client is purchasing 125 psig saturated steam from a regional supplier and is submetering the steam to 10 individual buildings and/or resource centers, including a school for the performing arts.
SUPERtrol-2 Wiring for Yokogawa Steam Meter	This Tech-Tip shows the wiring for connecting a Yokogawa Vortex Meter (DY Series) to a SUPERtrol II (ST2) Flow Computer. The diagram also shows the wiring for a 2-wire pressure transmitter.

Training aids

Utility Metering Tutorial	Power Point Presentation An overview of flowmetering technologies for use with KEP Flow Computers
LEVELtrol-II	Level/Total and Level/Batcher
SUPERtrol-ILE	Economical Rate/Totalizer & Batcher
SUPERtrol-I	Multifunction Flow Computer
SUPERtrol-II	Multifunction Heat, Gas, Steam Liquid Flow Computer