Timer/Counter - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Wed, 06 Nov 2019 01:50:45 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png Timer/Counter - KEPmeters https://kepmeters.com 32 32 INT62A https://kepmeters.com/product/int62a/ Sat, 19 May 2018 00:18:16 +0000 https://kepmeters.com/?post_type=product&p=1623 INT62A
Preset Timer with LED Display

The post INT62A first appeared on KEPmeters.

]]> The INT62A is a low cost, highly accurate 6 digit preset timer with relay output. The large, brilliant .6″ red-orange LED’s show the elapsed time. If there is a failure of the AC or DC power source, an internal memory system will retain all of the important information for at least ten years without any battery.

The post INT62A first appeared on KEPmeters.

]]> KEPtrol (KP8) https://kepmeters.com/product/keptrol-kp8/ Fri, 18 May 2018 20:55:38 +0000 https://kepmeters.com/?post_type=product&p=1609 KEPtrol (KP8)
Counter, Timer or Ratemeter

The post KEPtrol (KP8) first appeared on KEPmeters.

]]> Featuring 8 digits of bright, 0.55 inch, alpha-numeric, LED display, the KEPtrol can accept up to 100,000 pulses per second of digital count or rate data, and time in keyboard selected ranges of 1/10,000 of a second to hours. The unit can multiply the input from 0.0001 to 99.9999 to easily understood units of measurement and give two control outputs at separate set points.

The post KEPtrol (KP8) first appeared on KEPmeters.

]]> MS-735 https://kepmeters.com/product/ms-735/ Sat, 05 May 2018 23:08:49 +0000 https://kepmeters.com/?post_type=product&p=1514 MINIbatcher Special for Output Time Control

The post MS-735 first appeared on KEPmeters.

]]> Timed Relay Control With Start and Stop Buttons
The MS735 is a special version of our Minibatcher series batch counter. The standard Minibatcher is modified to bring a 60Hz (50 Hz) signal to pin 10 (AC powered units only). The user has the option of connecting this signal through the B relay and into the A input. By entering the proper scaling factor, the user can scale the input to read the desired time base. EXAMPLE: If the unit is powered with 115VAC @ 60Hz, The scaling factor for A can be set to yield different time bases: i.e. 60 yields seconds, 360 yields minutes & 1/ 10, 3600 yields minutes, etc. With a little imagination, this special can be used in many applications involving batch timing control. To order this special, add the prefix “MS735” to the standard Minibatcher part number, i.e. MS735MB2A3.

The post MS-735 first appeared on KEPmeters.

]]> MS-287 https://kepmeters.com/product/ms-287/ Sat, 05 May 2018 22:59:57 +0000 https://kepmeters.com/?post_type=product&p=1512 Timer/Counter Combo Or Dual Timer

The post MS-287 first appeared on KEPmeters.

]]> The MS287 is a special version of our Minitrol series counter/ratemeter. The standard Minitrol is modified to bring a 60Hz(50Hz) signal to pin 10 (AC powered units only). The user has theoption of connecting this signal to the A input, B input or both. Byentering the proper scaling factor, the user can scale the input toread the desired time base. EXAMPLE: If the unit is powered with115VAC @ 60Hz, The scaling factor for A can be set to yielddifferent time bases: i.e. 60 yields seconds, 360 yields minutes & 1/10, 3600 yields minutes, etc. Input B can be scaled the same wayor used as a separate counter. With a little imagination, thisspecial can be used in many applications involving time/countcontrol. To order this special, add the prefix “MS287” to thestandard Minitrol part number, i.e. MS287MC2A3

The post MS-287 first appeared on KEPmeters.

]]>