Pulse inputs - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Thu, 23 Jun 2022 04:28:21 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png Pulse inputs - KEPmeters https://kepmeters.com 32 32 52U https://kepmeters.com/product/52u/ Wed, 06 Nov 2019 01:08:24 +0000 https://kepmeters.com/?post_type=product&p=1933 Multipurpose Device: Counter, Rate Meter and Timer

The post 52U first appeared on KEPmeters.

]]> Operating modes: Electronic totalizer and frequency counter, counter with 2 totalizing Ranges, totalizer and timer, timer with 2 time ranges

The post 52U first appeared on KEPmeters.

]]> 525k, 529k, 530k https://kepmeters.com/product/525k-529k-530k/ Wed, 07 Feb 2018 08:09:02 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=865 Rate & Total Indicators with Pulse or Analog Inputs

The post 525k, 529k, 530k first appeared on KEPmeters.

]]> The 525K is a full fledge Ratemeter and Totalizer. It can indicate in rate/sec or minutes, and has a count frequency up to 10kHz. An overflow condition will be indicated by 1 Hz flashing of rate value and leading zeroes of totalizer. The 529K and 530K come available in four different resolutions, with a Display Range of -19999..0..99999 with leading zero blanking.

The post 525k, 529k, 530k first appeared on KEPmeters.

]]> DRT https://kepmeters.com/product/drt/ Wed, 07 Feb 2018 07:30:10 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=852 Dual Ratemeter-Totalizer with Two Separate Ratemeters, Totalizers with Combination Functions

The post DRT first appeared on KEPmeters.

]]> The DRT (Dual Rate Total) is a dual 5 digit Ratemeter and 6 digit Totalizer in a 1/8 DIN package. User selects 1 of 6 displays to show A,B or C rate and A,B or C total. Inputs A and B have separate scaling to read in engineering units.

The post DRT first appeared on KEPmeters.

]]> NAMUR R/T (NRT ) https://kepmeters.com/product/namur-r-t-nrt/ Wed, 07 Feb 2018 07:26:09 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=851 Totalizer & Ratemeter for use with NAMUR Sensors

The post NAMUR R/T (NRT ) first appeared on KEPmeters.

]]> The NAMUR R/T (NRT) is a 6 digit totalizer / ratemeter with two level, 5 digit preset alarm control of total or rate. Inputs A & B have separate scaling K-factors. The totalizer can be programmed for “A” subtract “B”, “A” add “B” or A & B as separate totalizers, with display and control of the “net” total and rate of “A”. The NAMUR R/T is also available in 2 other versions. NC2: a two preset totalizer with scaling, NR2: a high/low alarm ratemeter with scaling. If only one input is required, the unit will display the total and rate from that one channel. The NAMUR R/T can accept up to 10,000 pulses per second. It has a 5 digit floating decimal scale factor allowing total readout in true engineering units and rate per second, minute or hour.

The post NAMUR R/T (NRT ) first appeared on KEPmeters.

]]> MINItrol-PW (MRTPW) https://kepmeters.com/product/minitrol-pw-mrtpw/ Wed, 07 Feb 2018 07:24:27 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=850 Totalizer & Rate Meter for use with Low Flow Paddle or Pelton Wheel Turbine Flowmeters

The post MINItrol-PW (MRTPW) first appeared on KEPmeters.

]]> The Minitrol-PW (MRT-PW) is a single input counter and ratemeter intended for use with low flow paddle or pelton wheel turbine flowmeters. Two scale factors are used to describe the flowmeter calibration characteristics. The two 5 AMP preset relay outputs can be programmed by the user to apply to the “A” total counter or the “A” ratemeter. The user can view the rate, total and grand total.

The post MINItrol-PW (MRTPW) first appeared on KEPmeters.

]]> MINItrol-S (MRTS) https://kepmeters.com/product/minitrol-s-mrts/ Wed, 07 Feb 2018 07:11:04 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=848 Totalizer and Ratemeter with Separate Scaling of Rate & Total

The post MINItrol-S (MRTS) first appeared on KEPmeters.

]]> The Minitrol-S is a single input totalizer and ratemeter. The totalizer and ratemeter each have their own 5 digit dividing scale factor. The two 5 AMP preset relay outputs can be programmed by the user to apply to the “A” total counter or the “A” ratemeter. The user can view the rate, total and grand total. The B relay can be used to create a scaled pulse output. Magnetic pickup input, analog output and RS232 communication options are available.

The post MINItrol-S (MRTS) first appeared on KEPmeters.

]]> MINItrol (MRT) https://kepmeters.com/product/minitrol-mrt/ Wed, 07 Feb 2018 06:47:38 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=833 Flow Rate Totalizer from Pulse Inputs

The post MINItrol (MRT) first appeared on KEPmeters.

]]> The MINItrol (MRT) is a 6 digit totalizer and ratemeter with two level, 5 digit preset alarm control of total or rate. Inputs A & B have separate scaling K-factors. The totalizer can be programmed for “A” subtract “B”, “A” add “B” or A & B as separate totalizers, with display and control of the “net” total and rate of “A”. The MINITROL is also available in 4 other versions. MC2: a two preset totalizer with scaling, MR2: a high/low alarm ratemeter with scaling; The “MC”: a totalizing counter only, and the “MR”: a rate meter display only.

COMMON MODEL NUMBERS
MRTA3, MRTB3, MRTA3M, MRTB3M, MRTA5, MRTB5, MRTA9, MRTB9, MRTA31, MRTB31, MRTA32, MRTB32, MRTA33, MRTB33, MRTA34, MRTB34, MRTA3A, MRTB3B

The post MINItrol (MRT) first appeared on KEPmeters.

]]>