Preset Timer - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Sat, 19 May 2018 00:57:51 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png Preset Timer - KEPmeters https://kepmeters.com 32 32 DT20 https://kepmeters.com/product/dt20/ Sat, 19 May 2018 00:52:03 +0000 https://kepmeters.com/?post_type=product&p=1625 DT20
Programmable Time Switch

The post DT20 first appeared on KEPmeters.

]]> The DT20 is a compact electronic 24 hour/7 day time switch module, with heavy duty relay contacts for switching low or line voltage loads. Applicable for time of day control of pumps, fans, heaters, HVAC control circuits, lighting, machinery and many other types of commercial, industrial, and agricultural equipment.

The post DT20 first appeared on KEPmeters.

]]> INT62A https://kepmeters.com/product/int62a/ Sat, 19 May 2018 00:18:16 +0000 https://kepmeters.com/?post_type=product&p=1623 INT62A
Preset Timer with LED Display

The post INT62A first appeared on KEPmeters.

]]> The INT62A is a low cost, highly accurate 6 digit preset timer with relay output. The large, brilliant .6″ red-orange LED’s show the elapsed time. If there is a failure of the AC or DC power source, an internal memory system will retain all of the important information for at least ten years without any battery.

The post INT62A first appeared on KEPmeters.

]]> MS-735 https://kepmeters.com/product/ms-735/ Sat, 05 May 2018 23:08:49 +0000 https://kepmeters.com/?post_type=product&p=1514 MINIbatcher Special for Output Time Control

The post MS-735 first appeared on KEPmeters.

]]> Timed Relay Control With Start and Stop Buttons
The MS735 is a special version of our Minibatcher series batch counter. The standard Minibatcher is modified to bring a 60Hz (50 Hz) signal to pin 10 (AC powered units only). The user has the option of connecting this signal through the B relay and into the A input. By entering the proper scaling factor, the user can scale the input to read the desired time base. EXAMPLE: If the unit is powered with 115VAC @ 60Hz, The scaling factor for A can be set to yield different time bases: i.e. 60 yields seconds, 360 yields minutes & 1/ 10, 3600 yields minutes, etc. With a little imagination, this special can be used in many applications involving batch timing control. To order this special, add the prefix “MS735” to the standard Minibatcher part number, i.e. MS735MB2A3.

The post MS-735 first appeared on KEPmeters.

]]>