Magnetic Pickups - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Mon, 19 Feb 2018 04:08:13 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png Magnetic Pickups - KEPmeters https://kepmeters.com 32 32 AMP1 & AMP1-10K https://kepmeters.com/product/amp1-amp1-10k/ Sat, 17 Feb 2018 22:05:53 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1127 Preamp & Signal Conditioner for Magnetic Pickups

The post AMP1 & AMP1-10K first appeared on KEPmeters.

]]> The KEP AMP 1 amplifies the low level signals from a magnetic pickup or flow transmitter by a factor of more than a hundred times to drive any ratemeter, counter or controller. The unit uses only 30 mA and operates from 11 to 26 VDC. It has a 2.7K pullup resistor attached to the open collector output and sinks a minimum of 100 mA to less than 1 V from a maximum of 26 VDC. It is mounted in a rugged 2″ x 3″ metal housing with screw terminals for easy installation. Operating temperature is 32 to 140° F (0 to 60° C).

A special version, the AMP1-10k, is available with 10 kΩ impedance for use with turbine and paddle wheel flowmeters.

The post AMP1 & AMP1-10K first appeared on KEPmeters.

]]>