loop powered - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Thu, 23 Jun 2022 04:49:54 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png loop powered - KEPmeters https://kepmeters.com 32 32 SHPFI-M https://kepmeters.com/product/shpfi-m/ Sat, 17 Feb 2018 22:16:28 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1135 Smart Frequency to Current Loop Powered Flow Transmitter with Scaled Pulse Output

The post SHPFI-M first appeared on KEPmeters.

]]> The SHPFI-M is a smart frequency to current converter and also a frequency to frequency pulse scaler. It is intended to be used with flow meters and similar devices who generate a pulse signal either from a magnetic pickup or a contact closure whose frequency is related to flow rate and where each pulse represents a quantity of flow. The SHPFI-M also contains a linearization function commonly required by flow meters to improve their accuracy. The flow rate and total are computed within the SHPFI-M and the 4-20mA analog output and the high level scaled pulse output are generated from these computed values. The SHPFI-M is programmed using a special setup program from a PC. A special programming cable called the BSAC1 is also required. These items are purchased separately. The computed Rate and Total may also be viewed on your PC using these special cables.

The post SHPFI-M first appeared on KEPmeters.

]]> SC-IF (SCIF) https://kepmeters.com/product/sc-if-scif/ Sat, 17 Feb 2018 21:57:36 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1124 Current to Frequency Loop Powered Isolator

The post SC-IF (SCIF) first appeared on KEPmeters.

]]> The SC-IF is a loop powered signal conditioner whose function is to provide a 0 – 10kHz frequency output signal in response to a 4- 20mA analog input. The SC-IF appears to the input loop as a series shunt resistor. A small sense resistor is used to measure the input current. The input loop derives it’s power from the input current loop.

The post SC-IF (SCIF) first appeared on KEPmeters.

]]> SC-II (SCII) https://kepmeters.com/product/sc-ii/ Sat, 17 Feb 2018 21:50:42 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1121 Current to Current Loop Isolator

The post SC-II (SCII) first appeared on KEPmeters.

]]> The SC-II loop powered isolator is a signal conditioner whose function is to provide a retransmitted, galvanically isolated 4-20 mA output signal in response to isolated 4-20 analog input. The loop powered isolator may be applied in a similar manner as a conventional two wire transmitter.

The post SC-II (SCII) first appeared on KEPmeters.

]]> BAT RAT-M (BATRATM) https://kepmeters.com/product/batratm/ Fri, 09 Feb 2018 00:20:54 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=921 Battery Powered Flow Rate & Total Indicator with Alarm Output

The post BAT RAT-M (BATRATM) first appeared on KEPmeters.

]]> Featuring 4.5 digits of rate and 8 digits of total, the BAT RAT-M is a battery powered indicator with flow rate alarm output. It is capable of accepting magnetic pickup, DC pulse and switch closure inputs. The unit can be ordered with an optional 4-20mA output. The BAT RAT-M uses the 4-20mA loop to provide power when this output is used.

The post BAT RAT-M (BATRATM) first appeared on KEPmeters.

]]> BAT D/T-M (BATDTM) https://kepmeters.com/product/batdtm/ Fri, 09 Feb 2018 00:16:22 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=920 Battery Powered Dual Totalizer

The post BAT D/T-M (BATDTM) first appeared on KEPmeters.

]]> Featuring 5 digits of resettable total and 8 digits of grand total, the BAT D/T Millennium (BATDTM) is a battery powered indicator capable of accepting magnetic pickup, DC pulse and switch closure inputs from pulse producing flowmeters. A scaled pulse output is standard. A 4-20mA loop and/or linearization is optional.

The post BAT D/T-M (BATDTM) first appeared on KEPmeters.

]]> BAT R/T-M (BATRTM) https://kepmeters.com/product/batrtm/ Fri, 09 Feb 2018 00:05:11 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=919 Battery Powered or Loop Powered Flow Totalizer & Ratemeter

The post BAT R/T-M (BATRTM) first appeared on KEPmeters.

]]> Featuring 5 digits of rate and 8 digits of total, the BAT R/T Millennium edition (BATRT-M) is a battery powered or loop powered indicator capable of accepting magnetic pickup, DC pulse and switch closure inputs from pulse producing flowmeters. The unit can be ordered with an optional 4-20mA output. The BATRT-M uses the 4-20mA loop to provide power when this output is used.

The post BAT R/T-M (BATRTM) first appeared on KEPmeters.

]]> SQUIRT https://kepmeters.com/product/squirt/ Fri, 09 Feb 2018 00:00:15 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=918 LCD Loop Powered Indicator of Flow Rate & Total

The post SQUIRT first appeared on KEPmeters.

]]> Featuring up to 4 1/2 digits of rate and 8 digits of total, the Squirt is a loop powered indicator capable of accepting either linear or square root 4-20 mA inputs. An isolated scaled pulse output is available for hook up to a remote totalizer. Numeric password protection prevents unauthorized access to menu. The easy-to-read menu prompts make the Squirt so easy to program that you will feel comfortable programming it without the use of a manual.

The post SQUIRT first appeared on KEPmeters.

]]> SQUIRT-R https://kepmeters.com/product/squirt-r/ Thu, 08 Feb 2018 03:04:37 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=882 Loop Powered Ratemeter / Process Monitor

The post SQUIRT-R first appeared on KEPmeters.

]]> Featuring up to 4.5 digits of LCD display, the Squirt-R is a loop powered indicator capable of accepting either linear or square root 4-20 mA inputs. Numeric password protection prevents unauthorized access to the menu. The easy to- read menu prompts make the Squirt-R so easy to program that you will feel comfortable programming it without the use of a manual.

The post SQUIRT-R first appeared on KEPmeters.

]]>