LED display - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Mon, 08 Apr 2024 02:34:07 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png LED display - KEPmeters https://kepmeters.com 32 32 INT69R https://kepmeters.com/product/int69r/ Mon, 21 May 2018 00:48:24 +0000 https://kepmeters.com/?post_type=product&p=1638 INT69R
Analog Input Rate Meter

The post INT69R first appeared on KEPmeters.

]]> The Intellect-69R is a ratemeter which accepts analog signal inputs. The unit can be field programmed to accept 4-20mA, 0-20mA, 0-5V, 0-10V or 1- 5V signals. An optional Square Law input is available for inputs that require square root extraction. A 4-20mA output option is available to control strip recorders or other peripherals.

The post INT69R first appeared on KEPmeters.

]]> MINIrate (MR2) https://kepmeters.com/product/minirate-mr2/ Mon, 21 May 2018 00:32:45 +0000 https://kepmeters.com/?post_type=product&p=1637 MINItrol (MR2)
Low Cost, Pulse Input Rate Meter

The post MINIrate (MR2) first appeared on KEPmeters.

]]> The MR2 is a 4.5 digit rate meter with two level, 5 digit preset alarm control. It offers a scalable pulse input up to 10kHz max.

The post MINIrate (MR2) first appeared on KEPmeters.

]]> PROtrol (PRA) https://kepmeters.com/product/protrol-pra/ Mon, 21 May 2018 00:26:17 +0000 https://kepmeters.com/?post_type=product&p=1634 PROtrol
Draw, Ratio & Net Rate Meter

The post PROtrol (PRA) first appeared on KEPmeters.

]]> Featuring 6 digits of bright, 7-segment LED displays, the Protrol is a rate, ratio, draw and net rate meter which is field programmable. The two inputs (A & B) each have separate scaling factors. The unit can be programmed to display: two separate ratemeters (A & B), the net rate difference of A & B, the ratio of A to B (A ÷ B) or the draw [(A – B) ÷ B]. Two assignable set points are standard with a programmable hysteresis (alarm range).

The post PROtrol (PRA) first appeared on KEPmeters.

]]> INT62A https://kepmeters.com/product/int62a/ Sat, 19 May 2018 00:18:16 +0000 https://kepmeters.com/?post_type=product&p=1623 INT62A
Preset Timer with LED Display

The post INT62A first appeared on KEPmeters.

]]> The INT62A is a low cost, highly accurate 6 digit preset timer with relay output. The large, brilliant .6″ red-orange LED’s show the elapsed time. If there is a failure of the AC or DC power source, an internal memory system will retain all of the important information for at least ten years without any battery.

The post INT62A first appeared on KEPmeters.

]]> KEPtrol (KP8) https://kepmeters.com/product/keptrol-kp8/ Fri, 18 May 2018 20:55:38 +0000 https://kepmeters.com/?post_type=product&p=1609 KEPtrol (KP8)
Counter, Timer or Ratemeter

The post KEPtrol (KP8) first appeared on KEPmeters.

]]> Featuring 8 digits of bright, 0.55 inch, alpha-numeric, LED display, the KEPtrol can accept up to 100,000 pulses per second of digital count or rate data, and time in keyboard selected ranges of 1/10,000 of a second to hours. The unit can multiply the input from 0.0001 to 99.9999 to easily understood units of measurement and give two control outputs at separate set points.

The post KEPtrol (KP8) first appeared on KEPmeters.

]]> 8000 Counter https://kepmeters.com/product/8000-counter/ Fri, 18 May 2018 20:33:23 +0000 https://kepmeters.com/?post_type=product&p=1606 8000 Series
Electronic Counter with High Speed Input and LED Display

The post 8000 Counter first appeared on KEPmeters.

]]> The 8000 Series is a rugged, handsome, 8 digit electronic totalizing counter for sophisticated applications where high count speeds are required. It features a built-in 110/220 VAC – 50 to 400 Hz power supply which both powers the counter and provides 80 milliamps-of 12 VDC or regulated 5 VDC to power photoelectric and proximity sensors. In addition, the 8000 Series accepts a wide variety of AC/ DC and switch closure inputs at high speeds (up to 100 kHz) while operating accurately in noisy industrial environments. The 8000 series has a built-in, self- charging, nicad battery which protects the count for 1 week during power failures. Its .375″, .430″ and .6″ high LED displays are brightly projected through a glare reducing lens while its optional BCD output is ideal for interfacing with printers, recorders and other data processing equipment. The 8000 Series has no moving parts and, of course, carries a 2 year warranty.

The post 8000 Counter first appeared on KEPmeters.

]]> Beacon (BC) https://kepmeters.com/product/beacon-bc/ Fri, 18 May 2018 20:21:34 +0000 https://kepmeters.com/?post_type=product&p=1603 Beacon Series DPM
Low Cost Digital Panel Meters

The post Beacon (BC) first appeared on KEPmeters.

]]> The BEACON series is a bright addition to KEP’s product line. Featuring 31/2 digits of bright RED or GREEN (optional) LED’s, these meters outshine the competition by offering DIP switch selection of the most frequently used functions.

The post Beacon (BC) first appeared on KEPmeters.

]]> MS-735 https://kepmeters.com/product/ms-735/ Sat, 05 May 2018 23:08:49 +0000 https://kepmeters.com/?post_type=product&p=1514 MINIbatcher Special for Output Time Control

The post MS-735 first appeared on KEPmeters.

]]> Timed Relay Control With Start and Stop Buttons
The MS735 is a special version of our Minibatcher series batch counter. The standard Minibatcher is modified to bring a 60Hz (50 Hz) signal to pin 10 (AC powered units only). The user has the option of connecting this signal through the B relay and into the A input. By entering the proper scaling factor, the user can scale the input to read the desired time base. EXAMPLE: If the unit is powered with 115VAC @ 60Hz, The scaling factor for A can be set to yield different time bases: i.e. 60 yields seconds, 360 yields minutes & 1/ 10, 3600 yields minutes, etc. With a little imagination, this special can be used in many applications involving batch timing control. To order this special, add the prefix “MS735” to the standard Minibatcher part number, i.e. MS735MB2A3.

The post MS-735 first appeared on KEPmeters.

]]> MS-287 https://kepmeters.com/product/ms-287/ Sat, 05 May 2018 22:59:57 +0000 https://kepmeters.com/?post_type=product&p=1512 Timer/Counter Combo Or Dual Timer

The post MS-287 first appeared on KEPmeters.

]]> The MS287 is a special version of our Minitrol series counter/ratemeter. The standard Minitrol is modified to bring a 60Hz(50Hz) signal to pin 10 (AC powered units only). The user has theoption of connecting this signal to the A input, B input or both. Byentering the proper scaling factor, the user can scale the input toread the desired time base. EXAMPLE: If the unit is powered with115VAC @ 60Hz, The scaling factor for A can be set to yielddifferent time bases: i.e. 60 yields seconds, 360 yields minutes & 1/10, 3600 yields minutes, etc. Input B can be scaled the same wayor used as a separate counter. With a little imagination, thisspecial can be used in many applications involving time/countcontrol. To order this special, add the prefix “MS287” to thestandard Minitrol part number, i.e. MS287MC2A3

The post MS-287 first appeared on KEPmeters.

]]> FLOWtrol (FLO8) https://kepmeters.com/product/flo8/ Sat, 05 May 2018 21:13:14 +0000 https://kepmeters.com/?post_type=product&p=1506 Batch Controller with 2 DPDT Relays

The post FLOWtrol (FLO8) first appeared on KEPmeters.

]]> The FLOWtrol (FLO8) is a batch controller intended for use with pulse producing flowmeters. The FLOWtrol batcher offers control outputs consisting of DPDT Relays rather than SPDT Relays. The FLO8 may be applied in existing applications seeking to expand their batching operations with compatible units. The FLO8 was the fore runner to the BATCHtrol II. However, it lacks the rate display, analog input and Easy Preset capabilities now available in the BATCHtrol II. The BATCHtrol II is recommended for all new applications.

The post FLOWtrol (FLO8) first appeared on KEPmeters.

]]>