Frequency to Current - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Wed, 14 Jul 2021 20:35:09 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png Frequency to Current - KEPmeters https://kepmeters.com 32 32 SHPFI-M https://kepmeters.com/product/shpfi-m/ Sat, 17 Feb 2018 22:16:28 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1135 Smart Frequency to Current Loop Powered Flow Transmitter with Scaled Pulse Output

The post SHPFI-M first appeared on KEPmeters.

]]> The SHPFI-M is a smart frequency to current converter and also a frequency to frequency pulse scaler. It is intended to be used with flow meters and similar devices who generate a pulse signal either from a magnetic pickup or a contact closure whose frequency is related to flow rate and where each pulse represents a quantity of flow. The SHPFI-M also contains a linearization function commonly required by flow meters to improve their accuracy. The flow rate and total are computed within the SHPFI-M and the 4-20mA analog output and the high level scaled pulse output are generated from these computed values. The SHPFI-M is programmed using a special setup program from a PC. A special programming cable called the BSAC1 is also required. These items are purchased separately. The computed Rate and Total may also be viewed on your PC using these special cables.

The post SHPFI-M first appeared on KEPmeters.

]]> SC-FI (SCFI) https://kepmeters.com/product/sc-fi/ Sat, 17 Feb 2018 19:47:15 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1116 Frequency to Current Converter

The post SC-FI (SCFI) first appeared on KEPmeters.

]]> The SC-FI Signal Conditioner is a two wire frequency to analog converter that converts a pulse rate input into a 4-20 mA output signal proportional to frequency or rate. The input pulse rate is amplified and filtered by the input signal conditioning circuitry. Two forms of input signal conditioning are provided, one for magnetic pickups or contact closure inputs and the other is an isolated pulse input (depending on order code).

The post SC-FI (SCFI) first appeared on KEPmeters.

]]>