Flow Computer - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Sat, 25 Jun 2022 02:41:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png Flow Computer - KEPmeters https://kepmeters.com 32 32 Custom Batch Control Systems https://kepmeters.com/product/custom-batch-control/ Wed, 25 Sep 2019 20:32:19 +0000 https://kepmeters.com/?post_type=product&p=1912 Batch Control Made Easy!

The post Custom Batch Control Systems first appeared on KEPmeters.

]]> KEP offers custom batch control solutions for applications requiring multiple preset batch quantities. An easy to use and custom interface is provided using one of our touchscreen O/I displays which are connected to a KEP flow batch controller and are all mounted in a single NEMA wall mount enclosure.

The post Custom Batch Control Systems first appeared on KEPmeters.

]]> SUPERtrol-II (ST2) https://kepmeters.com/product/supertrol-st2/ Thu, 01 Feb 2018 05:53:01 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=772 Multifunction Flow Computer

The post SUPERtrol-II (ST2) first appeared on KEPmeters.

]]> The SUPERtrol II (ST2) Flow Computer can be used with a variety of flowmeter types in liquid, gas, steam and heat applications. Multiple flow equations are available in a single instrument with many advanced features. The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is supported
The various hardware inputs and outputs can be “soft” assigned to meet a variety of common application needs. The user “soft selects” the usage of each input/output while configuring the instrument. Consider the following illustrative examples.
The isolated analog output can be chosen to follow the volume flow, corrected volume flow, mass flow, temperature, pressure, or density by means of a menu selection. Most hardware features are assignable by this method.
The user can assign the standard RS-232 Serial Port for external data logging, transaction printing, or for connection to a modem for remote meter reading.
A Service or Test mode is provided to assist the user during start-up system check out by monitoring inputs and exercising outputs. The system setup can also be printed.

The post SUPERtrol-II (ST2) first appeared on KEPmeters.

]]> Flow Computer with Printer System https://kepmeters.com/product/flow-computer-printer-system/ Wed, 24 Jan 2018 22:39:47 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=681 Custom Systems with Flow Computer & Printer

The post Flow Computer with Printer System first appeared on KEPmeters.

]]> Example System Using ST1LE, PMi920, MS811
The ST1LE-PRN-SYS is a complete flow rate/totalizing or flow batching system including transaction printout. The system consists of one ST1LE Rate/Totalizer or Batch Controller with Rate and Total Display, one PMi920 Impact Printer (other printers available), one MD-20-24 power supply and one 3-Position Terminal Block. (Other accessories are available as needed) The system is enclosed in a fiberglass enclosure and is prewired by the factory prior to shipping (PW option).

Similar systems can be constructed using other KEP instruments and accessories. Please contact us to discuss your custom system.

The post Flow Computer with Printer System first appeared on KEPmeters.

]]>