economical - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Thu, 23 Jun 2022 05:21:33 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png economical - KEPmeters https://kepmeters.com 32 32 MINIbatcher (MB2) https://kepmeters.com/product/minibatcher-mb2/ Thu, 25 Jan 2018 06:19:39 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=713 Low Cost, Pulse Input, Flow Batcher

The post MINIbatcher (MB2) first appeared on KEPmeters.

]]> The MINI-Batcher is a 6 digit LED flow batcher with totalizer and 4.5 digit ratemeter display with two relay outputs for batch control . One output is dedicated to the batch amount (Preset A), the other can be activated for Prewarn or Batch/Grand Total. The MB2 can count up to the preset (reset to 0) or down from the preset (set to preset). Start, Stop and Reset functions can be activated from the front panel or remote inputs. The MINI-batcher is a must have for low cost batching systems.

The post MINIbatcher (MB2) first appeared on KEPmeters.

]]> MS-716 (MS716 ST1 Special) https://kepmeters.com/product/ms716-vehicle-skid-mount/ Thu, 25 Jan 2018 03:25:36 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=695 Vehicle & Skid Mount Flow Totalizer, Ratemeter & Batcher

The post MS-716 (MS716 ST1 Special) first appeared on KEPmeters.

]]> The MS-716 is a special version of the SUPERtrol-1 Flow Computer which is supplied in a vehicle mount enclosure. The MS-716 satisfies the instrument requirements for a variety of flowmeter types in liquid applications. Multiple flow equations and instrument functions are available in a single unit with many advanced features.
The alphanumeric display shows measured and calculated parameters in easy to understand format. Single key direct access to measurements and display scrolling is supported
The versatility of the MS-716 permits a wide measure of versatility within the instrument package. The various hardware inputs and outputs can be “soft” assigned to meet a variety of common application needs. The user “soft selects” the usage of each input/output while configuring the instrument.
The isolated analog output can be chosen to follow volume flow, corrected volume flow, mass flow, temperature, or density by means of a menu selection. Most hardware features are assignable by this method.
The user can assign the standard RS-232 Serial Port for data logging, transaction printing, or for connection to a modem for remote meter reading. A Service or Test mode is provided to assist the user during start-up system check out by monitoring inputs and exercising outputs and printing system setup.

The post MS-716 (MS716 ST1 Special) first appeared on KEPmeters.

]]> SUPERtrol-1LE (ST1LE) https://kepmeters.com/product/supertrol-st1le/ Wed, 10 Jan 2018 02:09:41 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=504 Economical Ratemeter, Totalizer & Batch Controller

The post SUPERtrol-1LE (ST1LE) first appeared on KEPmeters.

]]> The SUPERtrol 1LE (ST1LE) batch controller is a flow batcher for use with pulse producing flowmeter types in liquid applications.
The alphanumeric display shows flow rate and flow total as well as measured and calculated parameters in easy to understand format. Single key direct access to measurements and display scrolling is supported. An EZ Setup feature rapidly guides the user through the basic setup.
The SUPERtrol-I LE can be programmed for rate/total indication or batching. The various pulse inputs and outputs can be “soft” assigned to meet a variety of common application needs. The user “soft selects” the usage of each feature while configuring the instrument.
A 0-20mA or 4-20mA analog output is standard. The user can assign the standard RS-232 Serial Port for data logging, transaction printing, or for connection to a modem for remote meter reading.
An optional RS-485 serial port using Modbus RTU protocol is available. A Service or Test mode is provided to assist the user during start-up system check out by monitoring inputs and exercising outputs. The system setup can also be printed.

The post SUPERtrol-1LE (ST1LE) first appeared on KEPmeters.

]]>