analog inputs - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Mon, 08 Apr 2024 02:36:21 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png analog inputs - KEPmeters https://kepmeters.com 32 32 SQUIRT https://kepmeters.com/product/squirt/ Fri, 09 Feb 2018 00:00:15 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=918 LCD Loop Powered Indicator of Flow Rate & Total

The post SQUIRT first appeared on KEPmeters.

]]> Featuring up to 4 1/2 digits of rate and 8 digits of total, the Squirt is a loop powered indicator capable of accepting either linear or square root 4-20 mA inputs. An isolated scaled pulse output is available for hook up to a remote totalizer. Numeric password protection prevents unauthorized access to menu. The easy-to-read menu prompts make the Squirt so easy to program that you will feel comfortable programming it without the use of a manual.

The post SQUIRT first appeared on KEPmeters.

]]> APM-PROC https://kepmeters.com/product/apm-proc/ Thu, 08 Feb 2018 06:39:50 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=909 Process Meter with Selectable Inputs of 0-10V / 4-20mA / 10 -50mA

The post APM-PROC first appeared on KEPmeters.

]]> The programmable scale and custom annunciators mean users can tailor the meter to display their critical parameters exactly how they want, while the dynamic backlighting, in conjunction with setpoints, means operators are visually alerted when a parameter is out of range. The two outputs can be used to control other systems in the process, meaning the APM Process Meter is much more than just a display.
trurange™ technology brings a greater level of accuracy to the APM range through innovative input signal optimization. By using this technology, accuracy of 0.1% or better is now achieved, allowing for more precise measurement, display and control. Non-linear sensors, such as thermocouples and pressure transducers, can also be used thanks to the new APM Configurator application that allows the user to configure up to 20 points in a non-linear conversion table.

The post APM-PROC first appeared on KEPmeters.

]]> 529k https://kepmeters.com/product/529k/ Thu, 08 Feb 2018 06:24:49 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=904 Analog Input Rate, Process & Level Monitor

The post 529k first appeared on KEPmeters.

]]>
  • Display range -19999..0..99999 with leading zero blanking
  • Resolution 14 bit
  • 5 digit display
  • 4 different resolutions (0..20mA; 4..20mA;0..10V or 2..10V)
  • Scaling factor for displayed value
  • Automatic storage of maximum and minimum value (can be disabled in setup)
  • Input to activate storing of displayed value
  • Listing: UL listed (file#: E128604)

    • The post 529k first appeared on KEPmeters.

    ]]>         SQUIRT-R https://kepmeters.com/product/squirt-r/ Thu, 08 Feb 2018 03:04:37 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=882 Loop Powered Ratemeter / Process Monitor

    The post SQUIRT-R first appeared on KEPmeters.

    ]]>     Featuring up to 4.5 digits of LCD display, the Squirt-R is a loop powered indicator capable of accepting either linear or square root 4-20 mA inputs. Numeric password protection prevents unauthorized access to the menu. The easy to- read menu prompts make the Squirt-R so easy to program that you will feel comfortable programming it without the use of a manual.

    The post SQUIRT-R first appeared on KEPmeters.

    ]]>         Intellect-69PM2 (INT69PM2) https://kepmeters.com/product/intellect-69pm2-int69pm2/ Thu, 08 Feb 2018 02:46:33 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=880 Process Monitor with Analog Inputs

    The post Intellect-69PM2 (INT69PM2) first appeared on KEPmeters.

    ]]>     Featuring 4.5 digits of bright, 7-segment LED display, the Intellect-69PM2 is a process monitor which accepts analog signal inputs. The INT69PM2 can be used as a temperature display, pressure monitor, level indicator, ratemeter or display any other process using an analog signal. The unit can be field programmed to accept 0-20mA, 4-20mA, 0-5V, 0-10V or 1-5V signals. Two assignable set points are standard for high/low alarm outputs.

    The post Intellect-69PM2 (INT69PM2) first appeared on KEPmeters.

    ]]>         525k, 529k, 530k https://kepmeters.com/product/525k-529k-530k/ Wed, 07 Feb 2018 08:09:02 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=865 Rate & Total Indicators with Pulse or Analog Inputs

    The post 525k, 529k, 530k first appeared on KEPmeters.

    ]]>     The 525K is a full fledge Ratemeter and Totalizer. It can indicate in rate/sec or minutes, and has a count frequency up to 10kHz. An overflow condition will be indicated by 1 Hz flashing of rate value and leading zeroes of totalizer. The 529K and 530K come available in four different resolutions, with a Display Range of -19999..0..99999 with leading zero blanking.

    The post 525k, 529k, 530k first appeared on KEPmeters.

    ]]>         ES-756 https://kepmeters.com/product/es756/ Wed, 07 Feb 2018 07:40:13 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=855 Ratemeter & Totalizer from Analog Inputs with Separate Scaling of Rate & Total

    The post ES-756 first appeared on KEPmeters.

    ]]>     Featuring 6 digits of bright, 7-seg ment LED display, the ES-756 is an integrating totalizer & ratemeter which accepts analog signal inputs. The unit can be field programmed to accept 0-20mA, 4-20mA, 0-5V, 0-10V or 1-5V signals. A 4-20mA output option is available to control strip recorders or other peripherals. Two assignable set points are standard for two stage shut off. The full scale setting is programmable from the front panel. By pressing the “view” button, the unit will display: integrated total, rate, peak or valley.

    The post ES-756 first appeared on KEPmeters.

    ]]>         Intellect-69 (INT69) https://kepmeters.com/product/int69/ Wed, 07 Feb 2018 05:17:29 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=814 Ratemeter & Totalizer from Analog Inputs

    The post Intellect-69 (INT69) first appeared on KEPmeters.

    ]]>     The Intellect-69 is an integrating totalizer & ratemeter which accepts analog signal inputs. The unit can be field programmed to accept 4-20mA, 0-20mA, 0-5V, 0-10V or 1- 5V signals. An optional Square Law input is available for inputs that require square root extraction. A 4-20mA output option is available to control strip recorders or other peripherals.

    The post Intellect-69 (INT69) first appeared on KEPmeters.

    ]]>