Flow Computer - KEPmeters https://kepmeters.com Flow Meter Displays and DPMs by KEP Sat, 03 Jun 2023 21:49:01 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://kepmeters.com/wp-content/uploads/2019/08/cropped-K-site-logo-32x32.png Flow Computer - KEPmeters https://kepmeters.com 32 32 Compressed Air Flow Computer ES749 https://kepmeters.com/product/es749-air/ Wed, 11 Apr 2018 06:15:15 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1384 Compressed Air Metering Flow Computer with Advanced Options Available.

The post Compressed Air Flow Computer ES749 first appeared on KEPmeters.

]]> The Compressed Air Flow Computer ES-749 satisfies the instrument requirements for compressed air metering applications. The compressed air flow computer ES749 is suitable for use in compressed air metering applications.

 

The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is also supported.

Compressed Air Metering Illustration

 

 

Other Applications for ES-749 Include:

    • Natural Gas
    • Steam Mass, Steam Heat, Steam Net Heat, Steam Delta Heat
    • Fuel Oil
    • Industrial Gas
    • Chilled Water Only
    • Heated Water Only including Low Delta T Cutout

The post Compressed Air Flow Computer ES749 first appeared on KEPmeters.

]]> Industrial Gas Flow Computer ES749 https://kepmeters.com/product/es749-gas/ Wed, 11 Apr 2018 05:40:18 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1379 Industrial Gas Metering Flow Computer with Advanced Gas Equations.

The post Industrial Gas Flow Computer ES749 first appeared on KEPmeters.

]]> The Industrial Gas Flow Computer ES-749 satisfies the instrument requirements for gas metering applications. The industrial gas flow computer ES749 is suitable for use in gas metering applications for Gas Mass, Corrected Gas Volume and Gas Combustion Heat.

GAS MASS
A flowmeter measures the actual volume flow in a gas line. Temperature and pressure sensors are installed to measure temperature and pressure.

GAS CORRECTED VOLUME
A flowmeter measures the actual volume flow in a gas line. Temperature and pressure sensors are installed to correct for gas expansion effects.

GAS COMBUSTION HEAT
A flowmeter measures the actual volume flow in a gas line. Temperature and pressure sensors are installed to measure temperature and pressure.

The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is also supported.

Gas Mass Illustration

 

Gas Corrected Volume / Gas Combustion Heat Illustration

 

Other Applications for ES-749 Include:

    • Natural Gas
    • Steam Mass, Steam Heat, Steam Net Heat, Steam Delta Heat
    • Fuel Oil
    • Compressed Air
    • Chilled Water Only
    • Heated Water Only including Low Delta T Cutout

The post Industrial Gas Flow Computer ES749 first appeared on KEPmeters.

]]> Steam Metering Flow Computer ES749 https://kepmeters.com/product/es749-steam/ Wed, 11 Apr 2018 04:27:57 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1375 Steam Metering Flow Computer with Steam Mass, Steam Heat, Steam Net Heat and Steam Delta Heat Equations.

The post Steam Metering Flow Computer ES749 first appeared on KEPmeters.

]]> The Steam Metering Flow Computer ES-749 satisfies the instrument requirements for steam metering applications. The steam metering flow computer ES749 is suitable for use in Steam Mass, Steam Heat, Steam Net Heat and Steam Delta Heat applications.

STEAM MASS / STEAM HEAT
A flowmeter measures the actual volume flow in a steam line. A temperature and/or pressure sensor is installed to measure temperature and/or pressure.

STEAM NET HEAT
A flowmeter measures the actual volume flow in a steam line. A temperature and a pressure sensor are installed to measure temperature and/or pressure. All measurement are made on the steam side of a heat exchanger.

STEAM DELTA HEAT
Measures actual volume flow and pressure of the saturated steam in the supply piping as well as the temperature of the condensate in the downstream piping of a heat exchanger.

The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is also supported.

Steam Mass / Steam Heat Illustration

 

Steam Net Heat Illustration

 

Steam Delta Heat Illustration

 

Other Applications for ES-749 Include:

    • Natural Gas
    • Industrial Gases
    • Fuel Oil
    • Compressed Air
    • Chilled Water Only
    • Heated Water Only including Low Delta T Cutout

The post Steam Metering Flow Computer ES749 first appeared on KEPmeters.

]]> Natural Gas Flow Computer ES749 https://kepmeters.com/product/es749-natural-gas/ Wed, 11 Apr 2018 02:48:47 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=1365 Utility Metering Flow Computer with AGA NX-19 for Natural Gas Applications

The post Natural Gas Flow Computer ES749 first appeared on KEPmeters.

]]> The Natural Gas Flow Computer ES-749 satisfies the instrument requirements for natural gas applications. The NX-19 option is available for Natural Gas calculations where the user requires compensation for compressibility effects. Compensation for these compressibility effects are required at medium to high pressure and are a function of the gas specific gravity, % CO2, % Nitrogen, as well as temperature and pressure. The compressibility algorithm used is that for AGA NX-19.

The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is also supported.

Natural Gas Measurement Illustration

 

Other Applications for ES-749 Include:

    • Steam Mass
    • Steam Heat, Industrial Gases
    • Fuel Oil
    • Compressed Air
    • Chilled Water Only
    • Heated Water Only including Low Delta T Cutout

The post Natural Gas Flow Computer ES749 first appeared on KEPmeters.

]]> ST1-MANIFOLD-FC https://kepmeters.com/product/st1-manifold-fc/ Tue, 06 Feb 2018 06:31:01 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=804 2 Channel Manifold Controller & Flow Computer for Liquid Applications

The post ST1-MANIFOLD-FC first appeared on KEPmeters.

]]> A flowmeter manifold controller is a special flow instrument intended to accept inputs from two flowmeters, one larger and one smaller, and which also controls the bypass valve. The instrument setup contains the calibration information for both flowmeters as well as the manifold flow rate switch setpoint and hysteresis.

The post ST1-MANIFOLD-FC first appeared on KEPmeters.

]]> ST1-SUM-FC (ST1SUMFC) https://kepmeters.com/product/st1-sum-fc/ Tue, 06 Feb 2018 06:24:11 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=802 Rate/Total Flow Computer for Sum of 2 Flowmeters in Liquid Applications

The post ST1-SUM-FC (ST1SUMFC) first appeared on KEPmeters.

]]> The ST1-SUM-FC Flow Computer can monitor actual sum of two flow rate and two totals of any liquid. (Common applications include compound flowmeters) Flow alarms are provided via relays and datalogging is available via analog (4-20mA) and serial outputs.

The post ST1-SUM-FC (ST1SUMFC) first appeared on KEPmeters.

]]> ST1-NET-FC (ST1NETFC) https://kepmeters.com/product/st1-net-fc/ Sat, 03 Feb 2018 03:05:56 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=799 Net Rate & Net Total Flow Computer for Liquid Applications

The post ST1-NET-FC (ST1NETFC) first appeared on KEPmeters.

]]> The ST1-NET-FC Flow Computer can monitor actual net flow and total of any liquid. (Common applications include boiler and diesel engine fuel consumption measurement) Flow alarms are provided via relays and datalogging is available via analog (4-20mA) and serial outputs.

The post ST1-NET-FC (ST1NETFC) first appeared on KEPmeters.

]]> MS748 https://kepmeters.com/product/ms748/ Sat, 03 Feb 2018 00:26:55 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=796 Rugged, Vehicle/Field Mount, Multi-Function Flow Computer

The post MS748 first appeared on KEPmeters.

]]> The MS-748 Flow Computer satisfies the instrument requirements for a variety of flowmeter types in liquid, gas, steam and heat applications. Multiple flow equations are available in a single instrument with many advanced features. The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is supported.

The post MS748 first appeared on KEPmeters.

]]> ES761 https://kepmeters.com/product/es761/ Fri, 02 Feb 2018 21:06:42 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=794 Net Energy Flow Computer for Saturated Steam Energy & Condensate Return Energy

The post ES761 first appeared on KEPmeters.

]]> Many of today’s flow meters offer multiple outputs which are assignable to flow and temperature. The ES761ST2 offers enhanced functionality to permit these multiple outputs to be used with added flexibility. This flexibility is utilized in common applications such as when computing the net energy of saturated steam energy in minus condensate return energy out. Flow and Temperature can be measured at the multi-variable flow meter. A separate temperature measurement can be made in the condensate. The ES761 then computes the mass flow of steam as well as the input energy of steam from the available input sensors on steam, will also compute, the energy in the condensate return, and will compute the net energy. Refer to diagram which follows.

The post ES761 first appeared on KEPmeters.

]]> ES759 https://kepmeters.com/product/es759/ Fri, 02 Feb 2018 00:10:05 +0000 http://kepmeters.kep-temp.com/?post_type=product&p=791 Seasonal Utility Metering Flow Computer with Separate Heating Total and Cooling Total

The post ES759 first appeared on KEPmeters.

]]> The ES-759 is a special version of KEP’s SUPERtrol II which offers a special feature that allows users to access Heating Total by pressing the TOTAL button, and Cooling Total by pressing the GRAND button when using Liquid Delta Heat Equation. The ES759 ST2 is intended for use as a heat flow computer for systems which are used for part of the year as a heating system and part of the year as a cooling system. There are separate energy totalizers for heat total and cooling total. This functionality assumes that Liquid Delta Heat Equation is selected. The energy units for the heating and cooling totalizers must be the same. The Low Delta T Cutout represents a “dead band” which the T2-T1 calculation must exceed before the energy flow rates (heat flow rate) will show as a numeric value other than 0, and where one of the energy totalizers will begin accumulating.

The post ES759 first appeared on KEPmeters.

]]>