Communications - KEPmeters

Ayyeka Wavelet IIoT Edge Device

Glenn — Wed, 17 Mar 2021 23:16:17 +0000

Move your flow computer data to the cloud using an Ayyeka Wavelet device and access the information from a remote PC or mobile device. The Ayyeka cloud service is secure and private. The web-based data management system enables you to configure the device over-the-air and program various parameter threshold levels for email and/or SMS alerts, visualize data in real-time, and produce reports for presentation and analysis

The post Ayyeka Wavelet IIoT Edge Device first appeared on KEPmeters.

MS722-MPP56KN

Glenn — Sat, 17 Feb 2018 06:35:41 +0000

The MS722MPP-56KN Modem is compact and easy to install. It needs no batteries or AC power because it’s designed to run on the DC power provided from the SUPERtrol interface to which it attaches.

The Secure Modem operates at speeds up to 56k bps. The MS722MPP-56KN also features automatic answer on Caller I.D. match, so it can operate unattended as a secure modem with user defi ned permitted phone numbers.

It will operate over rotary or pushbutton lines since it works in tone or pulse dialing modes. The Modem is very small and simple to install. It offers an RJ-45 connector for your RS-232 port connection and an RJ-11 jack for your telephone cabling. An extra RJ-11 jack is provided to permit the connection of a portable telephone.

The MS722MPP-56KN complies fully with the Hayes Standard AT Command Set and the ITU V.22 bis and V.22 standards, as well as Bell 103 and Bell 212A protocols.

The post MS722-MPP56KN first appeared on KEPmeters.

MPP2400N

Glenn — Sat, 17 Feb 2018 06:30:54 +0000

The MPP-2400N Modem is compact and easy to install. It needs no batteries or AC power because it’s designed to run on the DC power provided from the SUPERtrol interface to which it attaches.

The post MPP2400N first appeared on KEPmeters.

USB-RS232

Glenn — Sat, 17 Feb 2018 06:26:21 +0000

This serial adapter with 6ft. cable works with Windows Vista. The USB to Serial Adapter USB serial I/O product provides a single USB to RS-232 serial port for providing USB connectivity to legacy or non-USB compliant devices via a DB9 connector.

With this new ultra sleek and powerful DB-9 Serial adapter design, there will be NO OBSTACLES while connecting to older legacy serial devices.

Our new rodent has LED visual representation for receiving and transmitting of data.

This new design also features industry standard FTDI logic board for compatibility from 9600 baud all the way up to 920K!!!

The post USB-RS232 first appeared on KEPmeters.

TROLlink

Glenn — Sat, 17 Feb 2018 06:13:18 +0000

TrolLink can connect to flow computers using local serial ports, modems and the Internet.
TROLlink collects data from 1 to 299 units, TROLlink Jr. collects data from 1, 1 to 5 or 1 to 15 units.
KEP Flow Computers Supported:
  Supertrol 2 – Flow Computer
  Supertrol 1 – Flow Totalizer, Ratemeter & Batch Controller
  ES 747 – Flow Computer for Liquid and Gas Applications
  Leveltrol 2 – Level Indicator

The post TROLlink first appeared on KEPmeters.

460MMBS

Glenn — Sat, 17 Feb 2018 06:10:47 +0000

The 460MMBS moves data between a group of Modbus RTU Slave devices and a BACnet/IP enabled Building Automation System (BAS). There are thousands of Modbus RTU sensors and actuators which are commonly used in building systems. These devices include temperature sensors, power meters, air handlers, drives, flow meters and other sensors of every type imaginable.

With the 460MMBS you have a device that you can quickly deploy and easily configure to access and integrate these devices into Building Automation Systems.

The post 460MMBS first appeared on KEPmeters.

BB2-3010

Glenn — Sat, 17 Feb 2018 06:08:17 +0000

The BB2-3010 is a BACnet MS/TP client/server device that functions as a Modbus RTU master/slave. A large number of BACnet objects gives you fl exibility in mapping Modbus registers to any combination of BACnet objects. Packed Modbus registers may be parsed to multiple BACnet objects when reading. Multiple BACnet objects may be packed into a single Modbus register when writing. All standard Modbus register types are supported.
Input objects will poll their assigned Modbus register at the interval you specify, and provide the Modbus data as the Present Value when read. Commandable Output objects are used to write Modbus registers, and will update the Modbus device each time BACnet is updated. The BB2-3010 supports up to 300 non-commandable objects, or up to 135 commandable objects, or a mix in between.
Value objects will poll their assigned Modbus register at the interval you specify. The content of the Modbus register will be given as the Present Value of the BACnet object when read. The Modbus register is written each time the BACnet Value object is written. The Value object corresponds to the Modbus Holding register.
The BB2-3010 is most often used as a Modbus master, but it can operate as a slave while MS/TP operates as a client (master). This makes it possible to put MS/TP devices on a Modbus network (but does still require an understanding of BACnet). MS/TP data in remote devices is queried and saved locally. The local data may then be accessed by another Modbus master.

The post BB2-3010 first appeared on KEPmeters.

IEPS-3000

Glenn — Sat, 17 Feb 2018 06:06:17 +0000

The IEPS3000 gives users the ability to connect KEP products with Ethernet networks. Up to six SUPERtrol II (ST2) units can be connected to each of the RS-232 ports on the IEPS3000. The port server allows customers to use their existing plant 10 base T ethernet rather than running separate cables to the ST2’s. This will permit users to have TROLlink, Infilink-HMI software, Server software or Flow Computer setup application running on a PC with an ethernet port. Their software at the PC end creates a virtual RS-232 COM Port for these programs.
Since the IEPS3000 works using an IP address and uses TCP/IP Protocol, it also has Internet address capabilities.
Port Server Software Included to:
• Assign IP Address
• Set Communication Parameters
• Create Virtual Com Port
The IEPS3000 is characterized by high reliability, superior software functionality, expanded hardware interfaces and simplified remote installation. The IEPS3000 is designed for users who need to manage, control, program and share access with one to four devices over the LAN or Internet using standard protocols.

The post IEPS-3000 first appeared on KEPmeters.

IEPS-1000

Glenn — Sat, 17 Feb 2018 06:03:37 +0000

The IEPS1000 gives users the ability to connect KEP products with Ethernet networks. The SUPERtrol II (ST2) unit can be connected to the RS-232 port on the IEPS1000. The port server allows customers to use their existing plant 10 base T ethernet rather than running separate cables to the ST2’s. This will permit users to have Infilink-HMI software, Server software or Flow Computer setup application running on a PC with an ethernet port. Their software at the PC end creates a virtual RS-232
COM Port for these programs.
Port Server Software Included to:
• Assign IP Address
• Set Communication Parameters
• Create Virtual Com Port
The IEPS1000 Series of Networked Peripheral Servers provide LAN-attached serial port expansion and remote monitoring. The IEPS1000 is targeted to users who need to manage, control, and share access with one to two peripheral devices over the LAN or Internet using standard protocols. The IEPS1000 uses industry standard TCP/IP, and telnet protocols to ensure open-systems connectivity and flexibility for your demanding applications. The IEPS1000 is bundled with Native COM port redirection software, web browser interface, and remote diagnostics. NativeCOM simplifies installation and support, and makes any LAN attached serial port (whether local or remote) appear as local to your Windows application.

The post IEPS-1000 first appeared on KEPmeters.

CA-285

Glenn — Sat, 17 Feb 2018 05:59:14 +0000

The CA-285 is a unique interface converter that can be configured by the user to convert either RS-422 or RS-485 to RS-232. When operating in RS-485 mode, the CA-285 has an “intelligent” mode which provides control of the RS-485 line.

The post CA-285 first appeared on KEPmeters.